Aluminum Profile
We can supply a variety of aluminum profiles from china.

Curtain Wall Profiles
1) Smooth and clean inside and outside surface ; 2) Bright surface ; 3) Uniform mechanical property ; 4) Tight tolerance ; 5) 110, 120, 150 series available ; 6) Surface treatment: anodic coloring, electrophoresis, painting, powder spraying ; 7) Reasonable structures ; 8) The frames can be concealed, half-concealed and unconcealed

malleable pipe fittings
our company is a main manufacture specialize in malleable pipe fittings .

Aluminum Braided Hose
1) Outer-diameter: 13 - 15mm ; 2) Length: 10 - 300cm ; 3) Wire diameter: 0.16mm ; 4) Nuts: brass or zinc ; 5) Insert: brass or zinc ; 6) Inner tube: EPDM / rubber

Pap
1) Aluminum-plastic pipe takes the welding aluminum alloy pipe as the middle layer, the inner and outer layer is coextrusion PE plastic ; 2) Each layer forms composite pipe with adhesive layer by thermal-heat adhesive, five layers structure is made with one-step method coextrusion, combines the advantages of metal pipe and plastic pipe ; 3) Aluminum-plastic pipe has high withstanding pressure, capability of anti-breaking ; 4) With strong distortion capability of plasticity, bend optionally in some radial range without bounce ; 5) Light mass, on same flow diameter, aluminum-plastic composite pipe is 1/3 of that of copper pipe, 1/15 of that of galvanized iron pipe ; 6) Smooth inner wall, no scale deposit, the flow is more than 30% of that of the same metal pipe ; 7) With some elasticity to weaken the water hammer phenomena during water supplying, cancel the pressure impaction and noise of fluid ; 8) Thermal conductivity is 0.45W/m.k, about 1/100 of that of steel pipe, it owns good performance of heat preservation ; 9) Coefficient of thermal expansion is 2.5 x 10-5m/m.k, only 1/8 of that of PE pipe, to a great extent, it is the same as that of aluminum material ; 10) With fine anti-flaming performance and electromagnetic screen performance ; 11) Low cold shortness temperature, ultraviolet ray proof, strong capability of heat ageing, long service life ; 12) Anti corrosion property: be able to to proof the corrosion of acid, alkali and salt, may transport kinds of corrosive liquid ; 13) Can be laid at the length of ten meters, even hundreds of meters, so it can reduce many joints ; 14) Bended optionally that it can reduce elbows as well ; 15) The inner layer of aluminum-pipe is hygienic PE material, heavy metal stabilizer included ; 16) Lead is not put in during processing, it has no toxicity but anti corrosion, no scale deposit and grow germs ; 17) Cold and hot water pipe system ; 18) Inner layer of aluminum-plastic pipe is smooth, no rust an scale deposit, the flow is more than 30% of that of metal pipe

Aluminium Hose
1) Diameter: Ø5mm, 30mm ; 2) Length: various lengths available

Cast Iron Pipes
1) Size: 1.5", 2", 3", 4", 5", 6", 8", 10", 12", 15" ; 2) Material: cast iron ; 3) Application: construction drainage, pollution discharge ; 4) Flat and straight ; 5) High strength and density without defect ; 6) Easy to install and maintain ; 7) Long lifetime, fireproof and low noise rate

Aluminium Braided Hose
Products available: gas hose, garden hose, air hose, shower hose, high-pressure hose, stainless steel braided hose, flexible hose, washing machine hose, PVC braided hose, connection hose, PVC clear hose, rubber and plastic hose, water hose, oil hose, shower spray hose.

Zinc-Aluminum Alloy Die-Cast Products
1) we can process Zinc-aluminum Alloy products as the picture and accept to producing the products as our customer's requirements ; 2) Selling well in italian, Japan, America and som other European countries ; 3) The quality has approved to Iso9002 and meet the export standard

Aluminum Pipes & Tubes
Our company can produce various high precision aluminum tubes including aluminum seamless tubes, irregular section tubes, and aluminum extrusion tubes that after drawing the error for internal and external diameter is less than 3μ. We use 7XXX, 6XXX, 5XXX, 3XXX, and 2XXX specifications of alloys. We can meet customer's demands for performance, precision and surface processing.

Aluminum Plastic Complex Pipe
Aluminum-plastic pipes, become more and more popular in the building, uesd both in edible water and gas. Compare with the metal pipes, the advantages of complex pipes include:  1.Stainless ; 2.Excellent  toughness ; 3.Cleanly and healthful ; 4.Weight light ; 5.Good airproof ; 6.Easily assembled ; 7.Appearance in good taste ; 8.excellent heat insulation and economical

Cast Iron Pipes
1) Flexible joint drainage pipes ; 2) Manufactured with centrifugal casting process which ensure its compactness and holeless ; 3) Advantages: a) Thin thickness ; b) Light in weight ; c) Accurate dimension ; d) Fine surface ; e) Stainless steel clamp and rubber seal is used in jointing to ensure leak-tightness and facilitate the fixing and removing ; f) Internal protection lining sprayed with epoxy or bitumen which is corrosion-resistant to acid, alkali, liquid waste and salt spray ; g) External coating sprayed with epoxy or ferrite oxide paint, which the paint color can be required by clients ; 4) Size: DN40 - DN600mm.

Ductile Iron Pipe
1) The pipes are produced with good straightness, even wall thickness, remarkable mechanical prosperities and firmly sticking internal and external coating layer ; 2) Flexible push-in joint and rubber gasket are used resulting in convenient installation of pipelines ; 3) The pipes are manufactured according to the international standard ISO2531 (E) and EN 545 ; 4) The pipes are push-in joint type, external coating zinc + bitumen painting, internal lined the cement mortar or ceramic epoxy ; 5) The gasket materials are the NR, NBR, EPDM, etc.. Ductile iron pipes for water conveyance: 1) Pipes are supplied in standard length of 5.5/6.0m, short length pipes as per respective standards can be supplied ; 2) In addition to Class K9 pipes, Electrosteel supplies K7, K8, K10, and K12 classes of pipes ; 3) The thickness can be determined by the formula-e=K (0.5+0.001DN) ; 4) PFA (allowable operating pressure) is the internal pressure, exclusive of surge, that a component can safely withstand in permanent service ; 5) PMA (allowable maximum operating pressure) is the maximum internal pressure, including surge, that a component can withstand for a relatively short duration, when either fixed above ground level or laid and back-filled underground in order to measure the integrity and leak tightness of the pipe. Ductile iron pipes for sewerage application.

ERW Galvanized Steel Tubes
We are a leading exporters of galvanized, stainless, cold rolled and all other types of steel wires including high carbon steel wires, low carbon steel wires, spring steel wires, coated steel wires, alloy steel wires, non-alloy steel wires used for variety of applications. We deals in erw galvanized steel tubes used for various application. Cold rolled mild steel strips is used for making galvanized steel tube. The process begins with a flat strip of steel, which is then cold-formed, and electric-resistance or induction welded. After welding, the tube receives a layer of protection - zinc coating. The result is a smooth, shiny end product that is unmatched in performance, appearance, strength, and durability. Our galvanized steel tubing is smoother, shinier, and resists rust longer than any competitive product on the market. In addition, our galvanized steel tubing can easily be fabricated. Older irrigation systems where made from galvanized steel pipes and tubes.

Square Tube & Pipe
1) Dimensions: 10 x 10mm - 200 x 200mm (1/2" x 1/2" - 8" x 8") ; 2) Wall thickness: 0.6000mm - 10.0000mm (0.0236" - 0.3937") ; 3) Tube/pipe & Channel length: 0.305m - 12.000m (1.000ft - 40.000ft) ; 4) Widely used in the construction structure, machinery, container, furniture structure, electromechanical hardware, door and guardrail, hall structure, airport structure, plaza structure, sports apparatus, automotive parts. Specifications: 1) Manufactured to meet ISO9001, ASTM, API, SAE, DIN, BS, GB and SY requirements ; 2) Available materials: Q195, Q215, Q235, Fe310, Fe360, St33, St37-2, SS330, SS400, ASTM 1010, ASTM 1017, ASTM 1020 ; 3) C channel and U channel, track and steel furrings for building, galvanized sheet/strip material in coils are also available.

Aluminum Pipes
We can process aluminum pipes as per clients' requirements, and accept deep processing of aluminum alloy products and surface anodization, and all our products meet export standards.

Aluminum Tube
We minly supply the aluminum tube and pipe, for camping beds, outdoor furnitures, beach chairs ect. Standard number:6063 series extrude and LY12 series.